PCV launch control

Post here on any modifications you have done, or have found for the Kawi

Moderator: BRP

Posts: 2
Joined: Sat Sep 15, 2012 8:28 pm

PCV launch control

Postby AlexM » Fri Feb 15, 2013 11:55 am

i have reacently added a pcv to my 06 ninja 650 and read through the manual and it says that if you take a wire from the ground side of the clutch switch to the crank input on the pcv you can actuate this feature. But in the program under Power Commander tools>Configure>Feature Enables and Selection Inputs it says switch input 1 and 2 what does this have to do with atuating this feature ?

Return to “Performance Upgrades”

Who is online

Users browsing this forum: No registered users and 2 guests