Parts for Sale, PCIII, SportBars & more

Parts, Accessories, Bikes, and Misc

Moderator: BRP

951_ninjarider
Posts: 218
Joined: Tue Jul 07, 2009 12:20 pm
Location: Murrieta, CA

Parts for Sale, PCIII, SportBars & more

Postby 951_ninjarider » Mon Jul 25, 2011 5:59 pm

Hi to all, I am cleaning house for a move across the states CA to GA and need to sell a few things that I never have used or don't use anymore. Here is a List of Items:
1....PC III, never installed, still in Box with everything. I think that I opened it when I first got it and that was it. $200.00
2....650 Shop Sport Bars with Ninja Logo, they can no longer make these with the Ninja logo any more and have not offered them like this for some time now. $100.00
3....2001 ZX-6E fork tubes and brakes that will slide right into your triples (41mm). They are about an inch longer than the stock ones so they will sit that much higher above the top tree to maintain the same geometry. The benefits: ability to set preload (sag) and damping, and the option to put clip-ones above or below the tree. I installed these Feb. 2010 and took them off about 3 months ago (give or take a week or two). In that time they have gotten about 1,500-2,000 miles on them, they are in great shape. They are, in a word, "Awesome". The other, perhaps even greater, perk to this package are the 2001 ZX-6E calipers with EBC scintered pads. OH...MY...GOD! I'm not sure the math is right but double the pistons must mean twice the stopping power. It's not scary either. I was able to brake so much later with so much more confidence. The reason these are useless outside this package is because the mounting lugs had to be machined for the caliper to be centered on the brake rotor. I used the stock bolts but put two SS washers under the heads. This set up will allow you to use your STOCK 650 WHEEL, you will not need to get a different front rim or tire with this set up. $200.00

I will post pictures as soon as I can. If you have any questions feel free to let me know. I have a few other parts for sale also but I have a local buyer that might pick them up. But if the deal doesn't work out I will post the other items.
Blown Motor
Parting Out Complete 650
User avatar
biketechted
Posts: 376
Joined: Sun Sep 06, 2009 8:22 pm

Re: Parts for Sale, PCIII, SportBars & more

Postby biketechted » Mon Jul 25, 2011 9:35 pm

PM sent for fork and brake package.

BTW What part of GA?
951_ninjarider
Posts: 218
Joined: Tue Jul 07, 2009 12:20 pm
Location: Murrieta, CA

Re: Parts for Sale, PCIII, SportBars & more

Postby 951_ninjarider » Tue Jul 26, 2011 1:10 pm

Here are some Pic's with the Forks and Brakes mounted with the Stock Rim and Tire.
You do not have the required permissions to view the files attached to this post.
Blown Motor
Parting Out Complete 650
951_ninjarider
Posts: 218
Joined: Tue Jul 07, 2009 12:20 pm
Location: Murrieta, CA

Re: Parts for Sale, PCIII, SportBars & more

Postby 951_ninjarider » Tue Jul 26, 2011 1:23 pm

I will take some more pic's tonight when I get off of work, of the parts only not installed (forks and brakes). I will also post the pictures of the other items I have too.
You do not have the required permissions to view the files attached to this post.
Blown Motor
Parting Out Complete 650
Fisher.
Posts: 48
Joined: Fri Sep 17, 2010 1:01 am

Re: Parts for Sale, PCIII, SportBars & more

Postby Fisher. » Tue Jul 26, 2011 2:18 pm

PM'd about PCIII.
User avatar
biketechted
Posts: 376
Joined: Sun Sep 06, 2009 8:22 pm

Re: Parts for Sale, PCIII, SportBars & more

Postby biketechted » Wed Jul 27, 2011 6:47 am

Passed on fork/brake package.

Still available.
951_ninjarider
Posts: 218
Joined: Tue Jul 07, 2009 12:20 pm
Location: Murrieta, CA

Re: Parts for Sale, PCIII, SportBars & more

Postby 951_ninjarider » Thu Jul 28, 2011 4:38 pm

PCIII.....Sold

Still have the ZX-6E Front End and the Sport Bars. Will be posting them up on eBay next week if no takers.
Blown Motor
Parting Out Complete 650
951_ninjarider
Posts: 218
Joined: Tue Jul 07, 2009 12:20 pm
Location: Murrieta, CA

Re: Parts for Sale, PCIII, SportBars & more

Postby 951_ninjarider » Thu Jul 28, 2011 5:34 pm

Here are two Pictures of the Sports bars. I do not know what is wrong with my camera but it will not allow me to post the picture right side up no mater what i do to it. Sorry i am not a I.T. person, I can not change the rotation of the picture. :fool
You do not have the required permissions to view the files attached to this post.
Blown Motor
Parting Out Complete 650
951_ninjarider
Posts: 218
Joined: Tue Jul 07, 2009 12:20 pm
Location: Murrieta, CA

Re: Parts for Sale, PCIII, SportBars & more

Postby 951_ninjarider » Thu Sep 08, 2011 5:57 pm

Up-Date:

1....PC III, never installed, still in Box with everything. I think that I opened it when I first got it and that was it. $200.00.....Sold
2....650 Shop Sport Bars with Ninja Logo, they can no longer make these with the Ninja logo any more and have not offered them like this for some time now. $100.00.....Sold
3....2001 ZX-6E fork tubes and brakes that will slide right into your triples (41mm). They are about an inch longer than the stock ones so they will sit that much higher above the top tree to maintain the same geometry. The benefits: ability to set preload (sag) and damping, and the option to put clip-ones above or below the tree. I installed these Feb. 2010 and took them off about 3 months ago (give or take a week or two). In that time they have gotten about 1,500-2,000 miles on them, they are in great shape. They are, in a word, "Awesome". The other, perhaps even greater, perk to this package are the 2001 ZX-6E calipers with EBC scintered pads. OH...MY...GOD! I'm not sure the math is right but double the pistons must mean twice the stopping power. It's not scary either. I was able to brake so much later with so much more confidence. The reason these are useless outside this package is because the mounting lugs had to be machined for the caliper to be centered on the brake rotor. I used the stock bolts but put two SS washers under the heads. This set up will allow you to use your STOCK 650 WHEEL, you will not need to get a different front rim or tire with this set up. $200.00
Blown Motor
Parting Out Complete 650
User avatar
kanatuna
Posts: 48
Joined: Wed Jun 08, 2011 11:23 am
Location: Norwood Ohio

Re: Parts for Sale, PCIII, SportBars & more

Postby kanatuna » Fri Sep 09, 2011 1:23 am

I'm interested in the brake/wheel package.... Does this come with the axle and spacers needed? Interested in any trades toward it?
WERA #626
951_ninjarider
Posts: 218
Joined: Tue Jul 07, 2009 12:20 pm
Location: Murrieta, CA

Re: Parts for Sale, PCIII, SportBars & more

Postby 951_ninjarider » Fri Sep 09, 2011 1:06 pm

kanatuna wrote:I'm interested in the brake/wheel package.... Does this come with the axle and spacers needed? Interested in any trades toward it?


This is a Fork Brake package, You will use the Stock 650R WHeel and tire that you have now as well as the Spacers. It will include the Axle and the washers need to mount the front brakes but every thing else that is needed is on your 650R already. I am also including the two bracket that i have to mount the stock fender to the forks and it will not use the stock brackets.
Blown Motor
Parting Out Complete 650
cougarfrog
Posts: 26
Joined: Sun Apr 25, 2010 6:57 am
Location: Sheffield, England

Re: Parts for Sale, PCIII, SportBars & more

Postby cougarfrog » Fri Jan 13, 2012 5:54 pm

Would you post to the UK ?

thanks
2006 ER6-F
951_ninjarider
Posts: 218
Joined: Tue Jul 07, 2009 12:20 pm
Location: Murrieta, CA

Re: Parts for Sale, PCIII, SportBars & more

Postby 951_ninjarider » Mon Jan 16, 2012 11:43 am

cougarfrog wrote:Would you post to the UK ?

thanks


PM sent.
Blown Motor
Parting Out Complete 650
Warhound
Posts: 34
Joined: Wed Jul 25, 2012 3:32 am

Re: Parts for Sale, PCIII, SportBars & more

Postby Warhound » Sun Aug 12, 2012 2:29 pm

Did the front end sell? :what
951_ninjarider
Posts: 218
Joined: Tue Jul 07, 2009 12:20 pm
Location: Murrieta, CA

Re: Parts for Sale, PCIII, SportBars & more

Postby 951_ninjarider » Mon Aug 13, 2012 9:28 am

Warhound wrote:Did the front end sell?

Yes the this front end is gone. But I do have the stock front forks brakes and other items if you need them. Here is a newer thread of parts:
http://www.brp650forum.com/phpbb3/viewtopic.php?f=16&t=2869
Blown Motor
Parting Out Complete 650
Ivank0
Posts: 19
Joined: Sat Jul 16, 2011 12:35 am

Re: Parts for Sale, PCIII, SportBars & more

Postby Ivank0 » Sat Sep 22, 2012 9:15 pm

951_ninjarider wrote::
the mounting lugs had to be machined for the caliper to be centered on the brake rotor. I used the stock bolts but put two SS washers under the heads
= Scary

Return to “For Sale”

Who is online

Users browsing this forum: No registered users and 2 guests