FS: custom built rearsets

Parts, Accessories, Bikes, and Misc

Moderator: BRP

User avatar
matthasthorns
Posts: 33
Joined: Mon Oct 13, 2008 4:43 am

FS: custom built rearsets

Postby matthasthorns » Mon Aug 08, 2011 4:28 pm

Made from 1/2" 6061 T3 plate. Cut out with a jigsaw and a small mill. The shift side is decent looking the brake side needs a little polish. Bolt right on with the stock 650r hardware. You will need to make a shift linkage for it. Comes with a hiem joint on the shift lever. Pictures don't show the shift side heel guard which is included. Both sides have levers with ball bearings. Send me a stock 650r shift lever and I will make a shift linkage for you.

$90 shipped unless you want it shipped someplace strange.

Image

Image

Image
951_ninjarider
Posts: 218
Joined: Tue Jul 07, 2009 12:20 pm
Location: Murrieta, CA

Re: FS: custom built rearsets

Postby 951_ninjarider » Mon Aug 08, 2011 4:47 pm

Looks good for jig saw. What Gauge is the Flat Bar?
Blown Motor
Parting Out Complete 650
User avatar
matthasthorns
Posts: 33
Joined: Mon Oct 13, 2008 4:43 am

Re: FS: custom built rearsets

Postby matthasthorns » Mon Aug 08, 2011 8:31 pm

If I remember right its 3/16"
951_ninjarider
Posts: 218
Joined: Tue Jul 07, 2009 12:20 pm
Location: Murrieta, CA

Re: FS: custom built rearsets

Postby 951_ninjarider » Tue Aug 09, 2011 10:09 am

:?: What is the peg height changing too over the stock location? Back ? Up? or both? Also do you provide the pegs or do the stock OEM pegs work with these rearsets? Cause in the picture they do not look stock.
Blown Motor
Parting Out Complete 650
User avatar
matthasthorns
Posts: 33
Joined: Mon Oct 13, 2008 4:43 am

Re: FS: custom built rearsets

Postby matthasthorns » Wed Aug 10, 2011 11:51 am

The pegs are 1.25" back and up from stock. It comes with the pegs shown, they are BMX bike pegs.

Return to “For Sale”

Who is online

Users browsing this forum: No registered users and 2 guests