Clutch springs how to

[David]

I think the ones that BRP sells are stronger~better than those that are on sale anywhere else. As they are custom made.

[BRP]

Just did some googling and found;

EBC CSK10 springs
$7.40 @ http://www.ronayers.com/ProductDetails/ ... KU/1409399[/quote]




Go ahead and buy those.
I'm sponsored by EBC, and I would not run their springs or clutch plates
in your bike.
I gave them the specs of the Barnett's I sell, hoping they would be able to match
something. Their springs are 3lbs weaker than stock, and they could not match
my specs. EBC does not make their own springs, I asked if they could custom
make 50 sets. They could not.
My springs are 8lbs stronger than Barnett's MT-55-5's.

[HipGnosis]

[quote="BRP Go ahead and buy those.
I'm sponsored by EBC, and I would not run their springs or clutch plates in your bike.
I gave them the specs of the Barnett's I sell, hoping they would be able to match
something. Their springs are 3lbs weaker than stock, and they could not match
my specs. EBC does not make their own springs, I asked if they could custom
make 50 sets. They could not.
My springs are 8lbs stronger than Barnett's MT-55-5's.[/quote]
Good to know. Thanks!

[ZiggyManSaad]

Gary, can we order those Barnett's through you or your custom made springs?

[BRP]

Gary, can we order those Barnett's through you or your custom made springs?

The springs I sell are the custom one. The picture is of standard Barnett's.
Mine are green.

[ZiggyManSaad]

How much? I wanna do the change in the spring. But I'm not sure if I want to switch to the Yoyodyne or just do the springs.

Another question totally unrelated(or it might be), how much are you asking for part number 46091A. The throttle casing. When I laid my bike down, I broke the plastic nub on the inside and my throttle gets stuck from time to time. Got really bad yesterday at a stop light when the rear tire actually started to spin. Shut the bike off, put it in neutral, turned it on, still did it. Clutch feels weaker now. Before, I could pull the clutch half way in and it would engage, now it feels like i'm pulling it past my thigh before it engages.

Any help would be great. I'll post this in tech as well. Thanks!