Er6/ninja tail conversions

Post here about any new accessory product you might find, or have installed on your 650

Moderator: BRP

stevener6
Posts: 2
Joined: Fri Apr 27, 2012 10:15 pm

Er6/ninja tail conversions

Postby stevener6 » Mon Apr 30, 2012 6:40 am

Hi guys new to the forum. I'm from Australia and ride an 07 er6n. I'm looking to see what tail conversions the members here have done. The catalyst tail is fantastic but am wondering If anyones done anything that has a rear seat or another tail? I'm doing a 'budget' build on my bike, doing all the work myself so the catalyst looks great as it's a simple swap over. Thanks!!
User avatar
biketechted
Posts: 376
Joined: Sun Sep 06, 2009 8:22 pm

Re: Er6/ninja tail conversions

Postby biketechted » Mon Apr 30, 2012 6:56 am

Catalyst is about your best bet unless you want to make another tail work.
Other than that, seat cowls are all that's left.
Kawasaki cowl is $240 or you can order one like on Twinshack http://www.twinshack.co.uk/prods/109.html for +/- $100
You may also find some China made ones on ebay.

Or you could sculpt one out of foam, make a mold of it, then lay some fiberglass or kevlar to make your own. :beer
stevener6
Posts: 2
Joined: Fri Apr 27, 2012 10:15 pm

Re: Er6/ninja tail conversions

Postby stevener6 » Tue May 01, 2012 7:16 am

Thanks bud. The cowl looks good for the 09+ models, anything earlier looks shite! I've heard of someone modifying the catalyst to hold a pillion seat but I'm steering towards a solo seat just because it's easier

Return to “Accessories”

Who is online

Users browsing this forum: No registered users and 2 guests